Click here for  Users Manual  (Acrobat file 1.9MB)

MVME1600-xxx VME PowerPC Baseboard Card

The MVME1600 is a 6U VME baseboard for the PowerPC(tm) microprocessor family of VMEbus boards. This card uses the Peripheral Component Interconnect (PCI) bus for all of the peripherals that are on the card. In addition, an industry standard mezzanine interface (PMC) is provided that conforms to the IEEE P1386.1 standard. The MVME1600 card supports one PMC module on the card.
Memory Options for the PowerPC 1600 provides you with a mezzanine array that supports from 8 MB to 128 MB of DRAM. The memory does not require any additional VME slots, and the memory can be field upgraded. VMEBus Interface for the PowerPC 1600 is a for D64:A32 master, with complete programmability of the VME interface characteristics. The Global Control and Status register allows board-to-board communications.
Peripheral Interface for the PowerPC 1600 is located on the front panel and the VMEbus P2 connector. There is a 16-bit SCSI-2 connector, SVGA graphics, mouse, and keyboard on the front panel. The P2 connector holds the Ethernet, parallel, and serial ports.

MVME1600 PowerPC on VME Features

• Single 32-Bit PMC Expansion Slot
• 8K X 8 NVRAM and Time of Day Clock
• Four Serial I/O Ports
• Two 32-Bit Timers
• Four 16-bit Timers
• Watchdog Timer
• 16-Bit SCSI-2 Bus
  •  
  • 32 Bit PCI
  •  
  • Local Bus DMA
• Ethernet Transceiver
  •  
  • 32 Bit PCI
  •  
  • Local Bus DMA
  •  
  • AUI Interface
  •  
  • 10base-T Interface
• Super VGA Graphics Port
  •  
  • 2 MB RAM
  •  
  • 800 X 600 X 16M Colors
  •  
  • 1280 X 1024 X 256 colors
  •  
  • Non-Interlaced
• 8-bit Bi-directional Printer Port
• A32/D32/BLT64 VMEbus Master/Slave Interface
• System Controller
• DMA Supports VME64 and PCI Local Bus Burst Cycles
• 4-level requestor and 7-level interrupt handler
• Remote Reset/Abort/LED/Status Control Functions
• VMEExec(tm) Real-Time Development Environment Support

Click here to return to product listing